Popular
-
18650 Li-ion 4xBattery 14.8v Holder Case
₹68.00
-
DC- DC Adjustable Step UP Boost Power Converter Module XL6009
₹65.00
-
1A Li-Ion Battery Charging Board TP4056 with Current Protection
₹15.00
-
5V 2.1A 3 USB Socket Battery Charger Step Up board Power Bank
₹90.00
-
Li-ion 18650 3.7V 3800mAh Rechargeable Battery
₹70.00
DC- DC Adjustable Step UP Boost Power Converter Module XL6009
₹65.00
XL6009 module is a non-isolated step-up boost voltage converter featuring adjustable output voltage, high efficiency. It converts input voltage of 3-32V DC to an output voltage of 5-35V DC / 3A
Features:
- Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V
- Wide Output voltage 5V ~ 35V
- Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
- High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)
Technical Parameters:
- Module Properties: Non-isolated boost (BOOST)
- Rectification: Non-Synchronous Rectification
- Input Voltage Range: 3V ~ 32V
- Output Voltage RAnge: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
- Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
- Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
- Switching frequency: 400KHz
- Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 0.5%
- Operating Temperature: -40 ? ~ +85 ?
- Dimensions: 43mm * 21mm * 14mm (L * W * H)
When using these modules remember that the output current will be a lot less than the input current, (remember – W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W.
Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink.
Related products
-
5V 2.1A 3 USB Socket Battery Charger Step Up board Power Bank
₹90.00Add to cartPower Bank 3 USB 5V 2.1A Battery Charger Step Up board
-
1A Li-Ion Battery Charging Board TP4056 with Current Protection
₹15.00Add to cartTP4056 1A Li-Ion Battery Charging Board with Current Protection
The TP4056 constant current-voltage linear charging module for single-cell 3.7 V lithium batteries. During charging and discharging, it will continuously monitor the battery’s voltage level and protects against overcharging and undercharging. It features two status outputs, one for charging in progress and the other for charging finished a glowing red LED indicates charging in progress and a glowing green LED indicates charging complete. It also has a programmable charge current of up to 1A.
Reviews
There are no reviews yet.