Category: Development Board

Showing all 12 results

• 

  Arduino Nano Board

  ₹300.00

  Arduino Nano is the most effective, price friendly widely popular microcontroller development board based on ATMega328. The same task you do with Arduino Uno, you can do with Arduino Nano. Arduino nano has in built usb power socket.

  Add to cart
• 

  Arduino UNO R3 Board

  ₹240.00

  Arduino UNO R3 board is suitable for any DIY automation project. You can use many sensors to it to get it processed in your way. It is re-programmable. It uses Atmega328P microcontroller as central processor. It is maid with CH340 USB to Serial converter driver chip.

  Add to cart
• 

  Bi-polar Driver for Stepper Motor

  ₹850.00

  The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board.

  Each Big Easy Driver can drive up to a max of 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1.7A/phase, a heatsink is required for loads approaching 2A/phase.

  Add to cart
• 

  Raspberry Pi 3 B with wifi and Bluetooth

  ₹2,500.00

  Single-board computer with wireless LAN and Bluetooth connectivity, a Quad-Core 64bit CPU.

  Whilst maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.

  The Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications. Additionally it adds wireless LAN & Bluetooth connectivity making it the ideal solution for powerful connected designs.

  Add to cart
• 

  Raspberry Pi 4 4GB Model B

  ₹4,500.00

  The Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.

  The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.

  Add to cart
• 

  Raspberry Pi 4 8GB Model B

  ₹6,100.00

  The Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.

  The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.

  Add to cart
• 

  Raspberry Pi Pico Original

  ₹270.00

  The PI PICO has RP2040 chip onbaord is supported with both C/C++ and micro-python, meaning that if you’re a beginner and want to learn any of these languages, the Raspberry Pico would be the best product-option to start with.

  Pi Pico is a micro-controller board based on in-house custom designed chip (RP2040) by Raspberry Pi in the UK. RP2040, the chip at the heart of Pico, is an ultra powerful Dual Core ARM Cortex-M0+ clocked at 133MHz with 256KB RAM, 2MB of on-board QSPI Flash memory for code and data storage. It also has 30 GPIO pins and lots of interfacing options including 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Moreover, 26 of the GPIO pins are multi-function, which means we can configure those pins to a different behavior like UART/I2C/SPI/GPIO.

  Add to cart
• 

  Raspberry Pi Pico W – Wireless

  ₹450.00

  The Raspberry Pi Pico W offers a minimal yet flexible design for supporting the RP2040 microcontroller chip. It features external components such as a Winbond W25Q16JV flash memory, a crystal, power supplies and decoupling, and a USB connector. The majority of the RP2040’s pins are accessible via user I/O pins on the left and right edges of the board. Four of the RP2040’s I/O pins are used for internal functions such as driving an LED, controlling the on-board switch mode power supply, and sensing system voltages.

  In addition, the Pico W features an on-board 2.4GHz wireless interface using an Infineon CYW43439, and an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected to the RP2040 through SPI. The board is designed to accommodate either soldered 0.1-inch pin-headers or to be used as a surface-mountable module, as the user I/O pins are also castellated. There are also SMT pads located under the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.

  The Raspberry Pi Pico W features an on-board buck-boost switch mode power supply (SMPS) which can generate the required 3.3V to power the RP2040 microcontroller and external circuitry from a wide range of input voltages, roughly between 1.8V to 5.5V. This provides a significant degree of flexibility in powering the board from various sources, such as a single lithium-ion cell or three AA cells in series. It also makes it easy to integrate battery chargers into the power chain.

  The Pico W’s flash memory can be reprogrammed using USB, by simply dragging and dropping a file onto the board which appears as a mass storage device. Alternatively, the standard serial wire debug (SWD) port can be used to reset the system and load and run code without any button presses. The SWD port can also be utilized for interactive debugging of code running on the RP2040.

  Add to cart
• 

  Raspberry Pi Zero W with headers

  ₹1,500.00

  Specifications:

  • Raspberry Pi Zero W (with headers presoldered)
  • At the heart of the Raspberry Pi Zero W is a 1GHz BCM2835 single-core processor with 512MB RAM. MIcro Sized Design
  • 802.11 b/g/n wireless LAN
  • Bluetooth 4.1
  • Bluetooth Low Energy (BLE)
  • 1GHz, single-core CPU
  • 512MB RAM
  • Mini HDMI and USB On-The-Go ports
  • Micro USB power
  • HAT-compatible 40-pin header pins
  • Composite video and reset headers
  • CSI camera connector

  Add to cart
• 

  Stepper Motor 28BYJ-48 5V 4 Phase 5 Wire With ULN2003 Driver Board

  ₹100.00

  This is 28BYJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board for arduino and raspberry pi. Make your own robot or any automated machine.
  5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board

  Motor:
  Diameter: 28mm
  Voltage: 5V
  Step angle: 5.625 x 1/64
  Reduction ratio: 1/64

  ULN2003 driver board:
  A, B, C, D LED indication Four-phase stepper motor work status
  Size: 31x35mm

  Package included:
  1 x ULN2003 driver board
  1 x 28BYJ-48 stepper motor

  Add to cart
• 

  TB6560 Stepper Driver 3A CNC Router 1-axis Controller

  ₹390.00

  TB6560 Stepper Driver 3A CNC Router 1-axis Controller has high-performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock input signal. Suitable for 2-phase Nema 17 and Nema 23 stepper motor up to 3 Ampere current rating.

  Add to cart
• 

  TB6600 CNC Stepper Motor Driver 4.0A 9-42V Controller

  ₹360.00

  TB6600 CNC Stepper Motor Driver 4.0A 9-42V Controller

  TB6600 is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal

  Add to cart