Category: Sensor

Robotics sensors are specialized devices integral to the functioning of robots, providing crucial information about their surroundings. These sensors enable robots to perceive, navigate, and interact with their environment.

Showing 1–16 of 23 results

37 In 1 Sensors Kit For Arduino
₹750.00

This is the most complete performance starter kit with all the essential Arduino sensors.

Add to cart
Alcohol Benzine Gas Module MQ3
₹100.00

MQ3 Alcohol Benzine Gas Module

It is used for on-site detection of motor vehicle drivers and other workers who are strictly prohibited from drinking. It is also used for detection of ethanol vapor in other places.

Add to cart
Alcohol Gas Sensor MQ303A
₹140.00

Winsen Semiconductor Type Alcohol Sensor is an original and brand new mini size alcohol sensor for gift-type breathalyzer use.

The sensitive material of the MQ303B gas sensor is a semiconductor material which is with lower conductivity in clean air. When the target alcohol gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit.

Semiconductor Type Alcohol Sensor has a high sensitivity to Alcohol gas. It is a kind of low-cost sensor for kinds of applications and also a mini size gift-type Alcohol sensor breathalyzer.

Add to cart
Ammonia Gas Sensor Module MQ135
₹90.00

MQ135 Air Quality Ammonia Gas Sensor Module

MQ135 Gas Sensor module for Air Quality having Digital as well as Analog output. Sensitive material of MQ135 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising. MQ135 gas sensor has high sensitivity to Ammonia, Sulphide and Benze steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different application.

Used for family, Surrounding environment noxious gas detection device, Apply to ammonia, aromatics, sulfur, benzene vapor, and other harmful gases/smoke, gas detection, tested concentration range: 10 to 1000 ppm.

Add to cart
Analog pH Sensor Amplifier Circuit for Arduino
₹1,200.00
The Analog pH Sensor Kit seems to be a user-friendly and convenient solution for measuring pH with Arduino controllers. Here are some key features and details about this kit:

Compatibility: The kit is specifically designed for Arduino controllers, making it easy to integrate with Arduino-based projects.

LED Power Indicator: It includes an LED that serves as a power indicator, allowing users to easily identify when the sensor is powered.

BNC Connector: The presence of a BNC connector makes it compatible with standard BNC connections, ensuring a reliable and widely-used interface for pH sensors.

PH2.0 Sensor Interface: The kit features a PH2.0 sensor interface, providing a standardized connection point for pH sensors. This simplifies the setup process and ensures a secure connection.

Simple Connection: The setup is designed to be simple and practical. Users can connect the pH sensor to the BNC connector and plug the PH2.0 interface into the analog input port of any Arduino controller. This ease of connection enhances user experience, especially for those new to sensor interfacing.

pH Value Retrieval: If pre-programmed, users can easily retrieve pH values through the Arduino controller. This makes it suitable for applications where monitoring and controlling pH levels are essential.

Compact Plastic Box: The kit is packaged in a compact plastic box with foam inserts. This packaging is designed for better mobility and storage, making it convenient for users who may need to transport the kit.

Foam Inserts: The inclusion of foam inserts in the plastic box suggests that the kit is well-protected during storage or transport, preventing damage to components.

Mobile Storage: The emphasis on mobile storage indicates that the kit is portable and suitable for on-the-go projects or field applications.

Pre-Programmability: Mention of being “pre-programmed” suggests that there may be some level of customization or programmability to adapt the sensor to specific applications.

Overall, the Analog pH Sensor Kit appears to be a user-friendly and practical solution for pH measurement with Arduino controllers, suitable for both beginners and experienced users. Users should refer to the provided documentation for programming details and usage instructions.
Add to cart
Capacitive Soil Moisture Sensor
₹50.00

This Capacitive Soil Moisture Sensor measures soil moisture levels by capacitive sensing rather than resistive sensing like other sensors on the market. It is made of corrosion-resistant material which gives it excellent service life. Insert it into the soil around your plants and impress your friends with real-time soil moisture data!

This module includes an onboard voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is perfect for low-voltage MCUs, both 3.3V, and 5V. For compatibility with a Raspberry Pi, it will need an ADC converter.

Add to cart
Carbon Monoxide CO Gas Sensor Module MQ7
₹100.00

MQ7 Carbon Monoxide CO Gas Sensor Module

This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5V.

Add to cart
LPG Propane Coal Natural Gas Sensor Module MQ5
₹100.00

The MQ-5 gas sensor is a commonly used module for detecting various combustible gases such as Methane, Propane, and Butane. It is widely employed in gas leakage detection equipment for both consumer and industrial applications. Here are some key features and characteristics of the MQ-5 LPG Propane Coal Natural Gas Sensor Module.

Add to cart
Methane CNG Gas Sensor Module MQ4
₹100.00

MQ4 CNG Methane Gas Sensor Module

MQ4 GAS Sensor is suitable for sensing natural gas, Methane (CH4). MQ4 gas sensor is composed of micro AL2O3 ceramic tube, Tin Dioxide (SnO2) sensitive layer, measuring electrode and heater are fixed into a crust made by plastic and stainless steel net. The heater provides necessary work conditions for work of sensitive components. The enveloped MQ – 4 has 6 pin, 4 of them are used to fetch signals, and other 2 are used for providing heating current. This MQ4 Gas sensor is suitable for detecting Natural Gas concentration. It has a high sensitivity and fast response time. Sensor provides an analog resistive output based on Natural Gas concentration.

Add to cart
Mini Infrared PIR Motion Detection Sensor Module HC-SR505
₹100.00

HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module is based on infrared technology, It automatically controls the products with high sensitivity, high reliability, ultra-small size, and ultra-low-voltage operation mode.

It is widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.

Add to cart
Peltier TEC1-12706 Thermoelectric Cooler 6A Module
₹150.00

Its too hot, design you own solid state refrigerator or thermoelectric cooler.

A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.

Add to cart
Peltier TEC1-12715 HighGrade Thermoelectric Cooler 15A Module
₹300.00

Peltier TEC1-12715 Thermoelectric Cooler 15A Module

Add to cart
Peltier thermoelectric cooling kit
₹800.00

This peltier cooler kit is designed for small space cooling.

Add to cart
Peltier Water Cooling Block 40×40 mm Aluminium
₹200.00

Peltier Water Cooling Block 40×40 mm Aluminium, perfect for the peltier 12706, 12715. One of the best technically approved grade of water block for your chiller, cooler.

Heavy Aluminum build

Internal flow channel extrusion forming

Applicable to computer CPU GPU Colling, industrial inverter driver, laser head cooling, industrial control cabinet cooling

Add to cart
PIR Motion Detection Sensor Module HC-SR501
₹60.00

The Passive Infrared Sensor (PIR) sensor module is used for motion detection. It can be used as motion detector for security systems or robotics. It works on 5V DC and gives TTL output which can be directly given to microcontroller or to relay through a transistor.It consists of pyroelectric sensor and fresnel lens that detects motion by measuring change in the infrared levels emitted by the objects. It can detect motion up to 20ft. This module is very sensitive to change in infrared levels subjected by human movement.

Add to cart
Rain Sensor Module for Arduino Raspberry PI
₹36.00
Rain Sensor Module for Arduino Raspberry PI is a Highly rated product. Make your own automated cloth hanger with rain alarming.

Specifications:

This sensor adopt high quality of RF-04 double sides material.Area of 5.0*4.0CM,plate nickle on side, Anti-oxidation,anti-conductivity, with long use time

The comparator output signal clean waveform is good, driving ability, over 15mA

Potentiometer adjust the sensitivity

Working voltage 3.3V-5V

Output format: Digital switching output (0 and 1) and analog voltage output AO

With bolt holes for easy installation

Small board PCB size: 3.2cm x 1.4cm

using a wide voltage LM393 comparator
Add to cart