Popular
-
18650 Li-ion 4xBattery 14.8v Holder Case
₹68.00
-
DC- DC Adjustable Step UP Boost Power Converter Module XL6009
₹65.00
-
1A Li-Ion Battery Charging Board TP4056 with Current Protection
₹15.00
-
5V 2.1A 3 USB Socket Battery Charger Step Up board Power Bank
₹90.00
-
Li-ion 18650 3.7V 3800mAh Rechargeable Battery
₹70.00
HDMI Cable 1.2 meter
₹150.00
- HDMI plug to HDMI plug leads
- Available in black or white and 1.2m in length
- Compatible with Raspberry Pi 3 and all previous Raspberry Pi models
- Triple layer shielding for better performance from WiFi and Bluetooth connectivity of Raspberry Pi 3
- HDMI 2.0 with Ethernet and audio return channel
- HDMI to HDMI Cable to Connect Raspberry Pi to a TV.
Related products
-
Micro HDMI to VGA Converter for Raspberry PI 4
₹400.00Add to cartConnect the raspberry pi 4 with your Computer Monitors, Projector or any display with VGA input.
Micro HDMI plug connector plugs to Raspberry pi 4 and the other end goes DB15 VGA port of Generic Computer Monitors
-
Raspberry Pi Zero W with headers
₹1,500.00Add to cartSpecifications:
- Raspberry Pi Zero W (with headers presoldered)
- At the heart of the Raspberry Pi Zero W is a 1GHz BCM2835 single-core processor with 512MB RAM. MIcro Sized Design
- 802.11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
- 1GHz, single-core CPU
- 512MB RAM
- Mini HDMI and USB On-The-Go ports
- Micro USB power
- HAT-compatible 40-pin header pins
- Composite video and reset headers
- CSI camera connector
-
Raspberry Pi Pico W – Wireless
₹450.00Add to cartThe Raspberry Pi Pico W offers a minimal yet flexible design for supporting the RP2040 microcontroller chip. It features external components such as a Winbond W25Q16JV flash memory, a crystal, power supplies and decoupling, and a USB connector. The majority of the RP2040’s pins are accessible via user I/O pins on the left and right edges of the board. Four of the RP2040’s I/O pins are used for internal functions such as driving an LED, controlling the on-board switch mode power supply, and sensing system voltages.
In addition, the Pico W features an on-board 2.4GHz wireless interface using an Infineon CYW43439, and an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected to the RP2040 through SPI. The board is designed to accommodate either soldered 0.1-inch pin-headers or to be used as a surface-mountable module, as the user I/O pins are also castellated. There are also SMT pads located under the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.
The Raspberry Pi Pico W features an on-board buck-boost switch mode power supply (SMPS) which can generate the required 3.3V to power the RP2040 microcontroller and external circuitry from a wide range of input voltages, roughly between 1.8V to 5.5V. This provides a significant degree of flexibility in powering the board from various sources, such as a single lithium-ion cell or three AA cells in series. It also makes it easy to integrate battery chargers into the power chain.
The Pico W’s flash memory can be reprogrammed using USB, by simply dragging and dropping a file onto the board which appears as a mass storage device. Alternatively, the standard serial wire debug (SWD) port can be used to reset the system and load and run code without any button presses. The SWD port can also be utilized for interactive debugging of code running on the RP2040.
-
Raspberry Pi 3 Enclosure Case
₹80.00Add to cartNeat plastic case for Raspberry Pi 3B and 3B+. No screws required, lid can be removed seperately for easy access.
N.B: Only case, no Raspberry Pi inside.
Reviews
There are no reviews yet.