Raspberry Pi 4 8GB Model B

Related products

• 

  Micro HDMI to VGA Converter for Raspberry PI 4

  ₹400.00

  Connect the raspberry pi 4 with your Computer Monitors, Projector or any display with VGA input.

  Micro HDMI plug connector plugs to Raspberry pi 4 and the other end goes DB15 VGA port of Generic Computer Monitors

  Add to cart
• 

  Raspberry Pi Pico W – Wireless

  ₹450.00

  The Raspberry Pi Pico W offers a minimal yet flexible design for supporting the RP2040 microcontroller chip. It features external components such as a Winbond W25Q16JV flash memory, a crystal, power supplies and decoupling, and a USB connector. The majority of the RP2040’s pins are accessible via user I/O pins on the left and right edges of the board. Four of the RP2040’s I/O pins are used for internal functions such as driving an LED, controlling the on-board switch mode power supply, and sensing system voltages.

  In addition, the Pico W features an on-board 2.4GHz wireless interface using an Infineon CYW43439, and an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected to the RP2040 through SPI. The board is designed to accommodate either soldered 0.1-inch pin-headers or to be used as a surface-mountable module, as the user I/O pins are also castellated. There are also SMT pads located under the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.

  The Raspberry Pi Pico W features an on-board buck-boost switch mode power supply (SMPS) which can generate the required 3.3V to power the RP2040 microcontroller and external circuitry from a wide range of input voltages, roughly between 1.8V to 5.5V. This provides a significant degree of flexibility in powering the board from various sources, such as a single lithium-ion cell or three AA cells in series. It also makes it easy to integrate battery chargers into the power chain.

  The Pico W’s flash memory can be reprogrammed using USB, by simply dragging and dropping a file onto the board which appears as a mass storage device. Alternatively, the standard serial wire debug (SWD) port can be used to reset the system and load and run code without any button presses. The SWD port can also be utilized for interactive debugging of code running on the RP2040.

  Add to cart
• 

  Raspberry Pi 4 4GB Model B

  ₹4,500.00

  The Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.

  The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.

  Add to cart
• 

  Soil Moisture Sensor Module for Arduino Raspberry PI

  ₹35.00

  Planning for an agricultural project – this is the product that you need. Easy to connect with Arduino Raspberry Pi

  The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out

  Add to cart