Popular
-
18650 Li-ion 4xBattery 14.8v Holder Case
₹68.00
-
DC- DC Adjustable Step UP Boost Power Converter Module XL6009
₹65.00
-
1A Li-Ion Battery Charging Board TP4056 with Current Protection
₹15.00
-
5V 2.1A 3 USB Socket Battery Charger Step Up board Power Bank
₹90.00
-
Li-ion 18650 3.7V 3800mAh Rechargeable Battery
₹70.00
Raspberry Pi Pico W – Wireless
₹450.00
The Raspberry Pi Pico W offers a minimal yet flexible design for supporting the RP2040 microcontroller chip. It features external components such as a Winbond W25Q16JV flash memory, a crystal, power supplies and decoupling, and a USB connector. The majority of the RP2040’s pins are accessible via user I/O pins on the left and right edges of the board. Four of the RP2040’s I/O pins are used for internal functions such as driving an LED, controlling the on-board switch mode power supply, and sensing system voltages.
In addition, the Pico W features an on-board 2.4GHz wireless interface using an Infineon CYW43439, and an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected to the RP2040 through SPI. The board is designed to accommodate either soldered 0.1-inch pin-headers or to be used as a surface-mountable module, as the user I/O pins are also castellated. There are also SMT pads located under the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.
The Raspberry Pi Pico W features an on-board buck-boost switch mode power supply (SMPS) which can generate the required 3.3V to power the RP2040 microcontroller and external circuitry from a wide range of input voltages, roughly between 1.8V to 5.5V. This provides a significant degree of flexibility in powering the board from various sources, such as a single lithium-ion cell or three AA cells in series. It also makes it easy to integrate battery chargers into the power chain.
The Pico W’s flash memory can be reprogrammed using USB, by simply dragging and dropping a file onto the board which appears as a mass storage device. Alternatively, the standard serial wire debug (SWD) port can be used to reset the system and load and run code without any button presses. The SWD port can also be utilized for interactive debugging of code running on the RP2040.
Features:
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n)
- Micro USB B port for power and data (and for reprogramming the flash)
- 40-pin 21mm×51mm ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
- Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
- 23 GPIO are digital-only, with three also being ADC capable
- Can be surface-mounted as a module
- 3-pin Arm serial wire debug (SWD) port
- Simple yet highly flexible power supply architecture
- Various options for easily powering the unit from micro USB, external supplies or batteries
- High quality, low cost, high availability
- Comprehensive SDK, software examples and documentation
Related products
-
Raspberry Pi 4 Protection Enclosure Case
₹100.00Add to cartRaspberry Pi 4 Case is a really durable case that will do a great job protecting your Raspberry Pi as well as gives the good cabinet looks to your Pi. It will provide adequate protection for your Pi and access to all the ports.. It is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4.
This Two-Piece ABS Case for Pi 4 is also designed so that you can see the smooth Pi status LEDs clearly from the rubber reflector provided to the case.
Easy two-piece installation design
Holes for mounting the pi inside the case
Rubber pad grip at the bottom
Precise access to all port and status LEDs with Symbols
Raspberry LOGO on Top
-
Raspberry Pi 4 4GB Model B
₹4,500.00Add to cartThe Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.
The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.
-
Raspberry PI 3 HDMI to VGA Converter
₹200.00Add to cartConnect the raspberry with your Computer Monitors, Projector or any display with VGA input.
This adapter has a standard HDMI plug connector at one end and at the other end a DB15 VGA connector.
-
Micro HDMI to VGA Converter for Raspberry PI 4
₹400.00Add to cartConnect the raspberry pi 4 with your Computer Monitors, Projector or any display with VGA input.
Micro HDMI plug connector plugs to Raspberry pi 4 and the other end goes DB15 VGA port of Generic Computer Monitors
Reviews
There are no reviews yet.