Popular
-
18650 Li-ion 4xBattery 14.8v Holder Case
₹68.00
-
DC- DC Adjustable Step UP Boost Power Converter Module XL6009
₹65.00
-
1A Li-Ion Battery Charging Board TP4056 with Current Protection
₹15.00
-
5V 2.1A 3 USB Socket Battery Charger Step Up board Power Bank
₹90.00
-
Li-ion 18650 3.7V 3800mAh Rechargeable Battery
₹70.00
Stepper Motor 3.3 kg-cm NEMA 17
₹355.00
NEMA 17 Hybrid Stepper Motor 5mm Round Shaft Two Phase Four Line Stepper Motor
*connector with wire Not Included, you need to arrange.
Stepper motor can not be directly connected to the AC frequency or DC power supply work, and must use a dedicated stepper motor driver, which consists of pulse generation control unit, power drive unit, the protection unit and other components. The drive unit is directly coupled to the stepper motor,
which can also be understood as the power interface of the microcomputer controller of the stepping motor.
Specification:
- Rated Power 6.6W
- Rated Voltage 12V
- Rated Current 1.3A
- Shaft length : 12mm
- Rated Speed 500rpm
- Rated Torque 0.320NM
- Location Torque 120kg-cm
- Holding Torque 3.3 kg-cm
- Resistance 2.1Ω
- Rotor Inertia 35g.cm²
- Inductance/Phase 2.5mH
- Line Number 4
- Applicable Scope industrial automation, medical equipment.
Related products
-
TB6560 Stepper Driver 3A CNC Router 1-axis Controller
₹390.00Add to cartTB6560 Stepper Driver 3A CNC Router 1-axis Controller has high-performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock input signal. Suitable for 2-phase Nema 17 and Nema 23 stepper motor up to 3 Ampere current rating.
-
Bi-polar Driver for Stepper Motor
₹850.00Add to cartThe Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board.
Each Big Easy Driver can drive up to a max of 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1.7A/phase, a heatsink is required for loads approaching 2A/phase.
-
TB6600 CNC Stepper Motor Driver 4.0A 9-42V Controller
₹360.00Add to cartTB6600 CNC Stepper Motor Driver 4.0A 9-42V Controller
TB6600 is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal
-
Stepper Motor 28BYJ-48 5V 4 Phase 5 Wire With ULN2003 Driver Board
₹100.00Add to cartThis is 28BYJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board for arduino and raspberry pi. Make your own robot or any automated machine.
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development boardMotor:
Diameter: 28mm
Voltage: 5V
Step angle: 5.625 x 1/64
Reduction ratio: 1/64ULN2003 driver board:
A, B, C, D LED indication Four-phase stepper motor work status
Size: 31x35mmPackage included:
1 x ULN2003 driver board
1 x 28BYJ-48 stepper motor
Reviews
There are no reviews yet.