Archives: Shop
Showing 1–16 of 88 results
-
18650 Li-ion 4xBattery 14.8v Holder Case
₹68.00Add to cartFeatures:
- Holds four 18650 batteries.
- Easy install, convenient to use.
- High-quality plastic material.
-
1A Li-Ion Battery Charging Board TP4056 with Current Protection
₹15.00Add to cartTP4056 1A Li-Ion Battery Charging Board with Current Protection
The TP4056 constant current-voltage linear charging module for single-cell 3.7 V lithium batteries. During charging and discharging, it will continuously monitor the battery’s voltage level and protects against overcharging and undercharging. It features two status outputs, one for charging in progress and the other for charging finished a glowing red LED indicates charging in progress and a glowing green LED indicates charging complete. It also has a programmable charge current of up to 1A.
-
37 In 1 Sensors Kit For Arduino
₹750.00Add to cartThis is the most complete performance starter kit with all the essential Arduino sensors.
-
5V 2.1A 3 USB Socket Battery Charger Step Up board Power Bank
₹90.00Add to cartPower Bank 3 USB 5V 2.1A Battery Charger Step Up board
-
Alcohol Benzine Gas Module MQ3
₹100.00Add to cartMQ3 Alcohol Benzine Gas Module
It is used for on-site detection of motor vehicle drivers and other workers who are strictly prohibited from drinking. It is also used for detection of ethanol vapor in other places.
-
Alcohol Gas Sensor MQ303A
₹140.00Add to cartWinsen Semiconductor Type Alcohol Sensor is an original and brand new mini size alcohol sensor for gift-type breathalyzer use.
The sensitive material of the MQ303B gas sensor is a semiconductor material which is with lower conductivity in clean air. When the target alcohol gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit.
Semiconductor Type Alcohol Sensor has a high sensitivity to Alcohol gas. It is a kind of low-cost sensor for kinds of applications and also a mini size gift-type Alcohol sensor breathalyzer.
-
Ammonia Gas Sensor Module MQ135
₹90.00Add to cartMQ135 Air Quality Ammonia Gas Sensor Module
MQ135 Gas Sensor module for Air Quality having Digital as well as Analog output. Sensitive material of MQ135 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising. MQ135 gas sensor has high sensitivity to Ammonia, Sulphide and Benze steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different application.
Used for family, Surrounding environment noxious gas detection device, Apply to ammonia, aromatics, sulfur, benzene vapor, and other harmful gases/smoke, gas detection, tested concentration range: 10 to 1000 ppm.
-
Analog pH Sensor Amplifier Circuit for Arduino
₹1,200.00Add to cartThe Analog pH Sensor Kit seems to be a user-friendly and convenient solution for measuring pH with Arduino controllers. Here are some key features and details about this kit:
- Compatibility: The kit is specifically designed for Arduino controllers, making it easy to integrate with Arduino-based projects.
- LED Power Indicator: It includes an LED that serves as a power indicator, allowing users to easily identify when the sensor is powered.
- BNC Connector: The presence of a BNC connector makes it compatible with standard BNC connections, ensuring a reliable and widely-used interface for pH sensors.
- PH2.0 Sensor Interface: The kit features a PH2.0 sensor interface, providing a standardized connection point for pH sensors. This simplifies the setup process and ensures a secure connection.
- Simple Connection: The setup is designed to be simple and practical. Users can connect the pH sensor to the BNC connector and plug the PH2.0 interface into the analog input port of any Arduino controller. This ease of connection enhances user experience, especially for those new to sensor interfacing.
- pH Value Retrieval: If pre-programmed, users can easily retrieve pH values through the Arduino controller. This makes it suitable for applications where monitoring and controlling pH levels are essential.
- Compact Plastic Box: The kit is packaged in a compact plastic box with foam inserts. This packaging is designed for better mobility and storage, making it convenient for users who may need to transport the kit.
- Foam Inserts: The inclusion of foam inserts in the plastic box suggests that the kit is well-protected during storage or transport, preventing damage to components.
- Mobile Storage: The emphasis on mobile storage indicates that the kit is portable and suitable for on-the-go projects or field applications.
- Pre-Programmability: Mention of being “pre-programmed” suggests that there may be some level of customization or programmability to adapt the sensor to specific applications.
Overall, the Analog pH Sensor Kit appears to be a user-friendly and practical solution for pH measurement with Arduino controllers, suitable for both beginners and experienced users. Users should refer to the provided documentation for programming details and usage instructions.
-
Arduino Nano Board
₹300.00Add to cartArduino Nano is the most effective, price friendly widely popular microcontroller development board based on ATMega328. The same task you do with Arduino Uno, you can do with Arduino Nano. Arduino nano has in built usb power socket.
-
Arduino Pro Mini
₹200.00Add to cartThe Arduino Pro Mini is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.
The Arduino Pro Mini was designed and manufactured by SparkFun Electronics.
-
Arduino UNO R3 Board
₹240.00Add to cartArduino UNO R3 board is suitable for any DIY automation project. You can use many sensors to it to get it processed in your way. It is re-programmable. It uses Atmega328P microcontroller as central processor. It is maid with CH340 USB to Serial converter driver chip.
-
Bi-polar Driver for Stepper Motor
₹850.00Add to cartThe Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board.
Each Big Easy Driver can drive up to a max of 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1.7A/phase, a heatsink is required for loads approaching 2A/phase.
-
-
-
-
