Archives: Shop
Showing 65–80 of 88 results
-
Raspberry Pi 3 Enclosure Case
₹80.00Add to cartNeat plastic case for Raspberry Pi 3B and 3B+. No screws required, lid can be removed seperately for easy access.
N.B: Only case, no Raspberry Pi inside. -
Raspberry PI 3 HDMI to VGA Converter
₹200.00Add to cartConnect the raspberry with your Computer Monitors, Projector or any display with VGA input.
This adapter has a standard HDMI plug connector at one end and at the other end a DB15 VGA connector.
-
Raspberry Pi 4 2GB Model B
₹3,700.00Add to cartThe Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.
The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.
-
Raspberry Pi 4 4GB Model B
₹4,500.00Add to cartThe Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.
The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.
-
Raspberry Pi 4 8GB Model B
₹6,100.00Add to cartThe Raspberry Pi 4 Model B line is a desktop computer in a package the size of a credit card. All you need to do is plug in a monitor, keyboard, mouse and load the latest Raspbian image onto a MicroSD Card and you have a full desktop computer solution. Projects like Tensorflow, PiHole, Minecraft, and Kodi make it an excellent tool for a multitude of uses.
The RPi4 retains a lot of the features of the RPi3 B+ including the pin-out for the 40 pin header. Wireless is still available on the 4 in the form of dual-band 2.4/5.0 GHz WiFi and Bluetooth 5.0. A new feature on the 4 is the inclusion of a USB Type-C connector for power delivery replacing the Mini-B connector.
-
Raspberry Pi 4 Protection Enclosure Case
₹100.00Add to cartRaspberry Pi 4 Case is a really durable case that will do a great job protecting your Raspberry Pi as well as gives the good cabinet looks to your Pi. It will provide adequate protection for your Pi and access to all the ports.. It is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4.
This Two-Piece ABS Case for Pi 4 is also designed so that you can see the smooth Pi status LEDs clearly from the rubber reflector provided to the case.
Easy two-piece installation design
Holes for mounting the pi inside the case
Rubber pad grip at the bottom
Precise access to all port and status LEDs with Symbols
Raspberry LOGO on Top
-
Raspberry Pi Pico Original
₹270.00Add to cartThe PI PICO has RP2040 chip onbaord is supported with both C/C++ and micro-python, meaning that if you’re a beginner and want to learn any of these languages, the Raspberry Pico would be the best product-option to start with.
Pi Pico is a micro-controller board based on in-house custom designed chip (RP2040) by Raspberry Pi in the UK. RP2040, the chip at the heart of Pico, is an ultra powerful Dual Core ARM Cortex-M0+ clocked at 133MHz with 256KB RAM, 2MB of on-board QSPI Flash memory for code and data storage. It also has 30 GPIO pins and lots of interfacing options including 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Moreover, 26 of the GPIO pins are multi-function, which means we can configure those pins to a different behavior like UART/I2C/SPI/GPIO.
-
Raspberry Pi Pico W – Wireless
₹450.00Add to cartThe Raspberry Pi Pico W offers a minimal yet flexible design for supporting the RP2040 microcontroller chip. It features external components such as a Winbond W25Q16JV flash memory, a crystal, power supplies and decoupling, and a USB connector. The majority of the RP2040’s pins are accessible via user I/O pins on the left and right edges of the board. Four of the RP2040’s I/O pins are used for internal functions such as driving an LED, controlling the on-board switch mode power supply, and sensing system voltages.
In addition, the Pico W features an on-board 2.4GHz wireless interface using an Infineon CYW43439, and an onboard antenna licensed from ABRACON (formerly ProAnt). The wireless interface is connected to the RP2040 through SPI. The board is designed to accommodate either soldered 0.1-inch pin-headers or to be used as a surface-mountable module, as the user I/O pins are also castellated. There are also SMT pads located under the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow-soldered SMT module.
The Raspberry Pi Pico W features an on-board buck-boost switch mode power supply (SMPS) which can generate the required 3.3V to power the RP2040 microcontroller and external circuitry from a wide range of input voltages, roughly between 1.8V to 5.5V. This provides a significant degree of flexibility in powering the board from various sources, such as a single lithium-ion cell or three AA cells in series. It also makes it easy to integrate battery chargers into the power chain.
The Pico W’s flash memory can be reprogrammed using USB, by simply dragging and dropping a file onto the board which appears as a mass storage device. Alternatively, the standard serial wire debug (SWD) port can be used to reset the system and load and run code without any button presses. The SWD port can also be utilized for interactive debugging of code running on the RP2040.
-
Raspberry Pi Zero W with headers
₹1,500.00Add to cartSpecifications:
- Raspberry Pi Zero W (with headers presoldered)
- At the heart of the Raspberry Pi Zero W is a 1GHz BCM2835 single-core processor with 512MB RAM. MIcro Sized Design
- 802.11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
- 1GHz, single-core CPU
- 512MB RAM
- Mini HDMI and USB On-The-Go ports
- Micro USB power
- HAT-compatible 40-pin header pins
- Composite video and reset headers
- CSI camera connector
-
-
RS-775 Brushed High Speed DC Motor
₹200.00Add to cartRS-775 High Power Best Quality Multipurpose 12V DC Brushed Motor
-
Smoke and Flammable Gas Sensor Module
₹75.00Add to cartMQ2 Smoke and Flammable Gas Module
This module uses MQ2 Smoke & Flammable gas sensor as a gas sensing element. It requires no external components just plug in Vcc & ground pins and you are ready to go.
For Digital output the threshold value can be easily set by an on-board potentiometer. Using this module you can easily interface MQ2 Smoke & Combustible gas Sensor to any Microcontroller, Arduino or even Raspberry Pi.
Since this Gas Sensor module is sensitive to smoke it can be used in for fire detection. MQ2 Gas Sensor is also sensitive to flammable/combustible gasses like LPG, Propane & Hydrogen.
-
Soil Moisture Sensor Module for Arduino Raspberry PI
₹35.00Add to cartPlanning for an agricultural project – this is the product that you need. Easy to connect with Arduino Raspberry Pi
The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out
-
Stepper Motor 28BYJ-48 5V 4 Phase 5 Wire With ULN2003 Driver Board
₹100.00Add to cartThis is 28BYJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board for arduino and raspberry pi. Make your own robot or any automated machine.
5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development boardMotor:
Diameter: 28mm
Voltage: 5V
Step angle: 5.625 x 1/64
Reduction ratio: 1/64ULN2003 driver board:
A, B, C, D LED indication Four-phase stepper motor work status
Size: 31x35mmPackage included:
1 x ULN2003 driver board
1 x 28BYJ-48 stepper motor -
Stepper Motor 3.3 kg-cm NEMA 17
₹355.00Add to cartNEMA 17 Hybrid Stepper Motor 5mm Round Shaft Two Phase Four Line Stepper Motor
*connector with wire Not Included, you need to arrange.
Stepper motor can not be directly connected to the AC frequency or DC power supply work, and must use a dedicated stepper motor driver, which consists of pulse generation control unit, power drive unit, the protection unit and other components. The drive unit is directly coupled to the stepper motor,
which can also be understood as the power interface of the microcomputer controller of the stepping motor.
-
Stepper Motor High Grade 4.4 kg-cm Nema17 1.8 Degree JK42HS40-1704
₹800.00Add to cartStepper Motor Nema17 1.8 Degree JK42HS48-1684 – Use for robot , electronic automatic equipment , medical instrument, motion advertisements, instruments, lighting & audio equipment, printer, textile machinery, Cnc router, 3D Printer etc.
